Rapid prototyping and facile customization of conductive hydrogel bioelectronics based on all laser process.

Proper customization in size and shape is essential in implantable bioelectronics for stable bio-signal recording. Over the past decades, many researchers have heavily relied on conventional photolithography processes to fabricate implantable bioelectronics. Therefore, they could not avoid the critical limitation of high cost and complex processing steps to optimize bioelectronic devices for target organs with various sizes and shapes. Here, we propose rapid prototyping using all laser processes to fabricate customized bioelectronics. PEDOT:PSS is selectively irradiated by an ultraviolet (UV) pulse laser to form wet-stable conductive hydrogels that can softly interact with biological tissues (50 µm line width). The encapsulation layer is selectively patterned using the same laser source by UV-curing polymer networks (110 µm line width). For high stretchability (over 100%), mesh structures are made by the selective laser cutting process. Our rapid prototyping strategy minimizes the use of high-cost equipment, using only a single UV laser source to process the electrodes, encapsulation, and substrates that constitute bioelectronics without a photomask, enabling the prototyping stretchable microelectrode array with an area of 1 cm2 less than 10 min. We fabricated an optimized stretchable microelectrode array with low impedances (∼1.1 kΩ at 1 kHz) that can effectively record rat's cardiac signals with various health states.

Paintable Decellularized-ECM Hydrogel for Preventing Cardiac Tissue Damage.

The tissue-specific heart decellularized extracellular matrix (hdECM) demonstrates a variety of therapeutic advantages, including fibrosis reduction and angiogenesis. Consequently, recent research for myocardial infarction (MI) therapy has utilized hdECM with various delivery techniques, such as injection or patch implantation. In this study, a novel approach for hdECM delivery using a wet adhesive paintable hydrogel is proposed. The hdECM-containing paintable hydrogel (pdHA_t) is simply applied, with no theoretical limit to the size or shape, making it highly beneficial for scale-up. Additionally, pdHA_t exhibits robust adhesion to the epicardium, with a minimal swelling ratio and sufficient adhesion strength for MI treatment when applied to the rat MI model. Moreover, the adhesiveness of pdHA_t can be easily washed off to prevent undesired adhesion with nearby organs, such as the rib cages and lungs, which can result in stenosis. During the 28 days of in vivo analysis, the pdHA_t not only facilitates functional regeneration by reducing ventricular wall thinning but also promotes neo-vascularization in the MI region. In conclusion, the pdHA_t presents a promising strategy for MI treatment and cardiac tissue regeneration, offering the potential for improved patient outcomes and enhanced cardiac function post-MI.

PIBF1 regulates trophoblast syncytialization and promotes cardiovascular development.

Proper placental development in early pregnancy ensures a positive outcome later on. The developmental relationship between the placenta and embryonic organs, such as the heart, is crucial for a normal pregnancy. However, the mechanism through which the placenta influences the development of embryonic organs remains unclear. Trophoblasts fuse to form multinucleated syncytiotrophoblasts (SynT), which primarily make up the placental materno-fetal interface. We discovered that endogenous progesterone immunomodulatory binding factor 1 (PIBF1) is vital for trophoblast differentiation and fusion into SynT in humans and mice. PIBF1 facilitates communication between SynT and adjacent vascular cells, promoting vascular network development in the primary placenta. This process affected the early development of the embryonic cardiovascular system in mice. Moreover, in vitro experiments showed that PIBF1 promotes the development of cardiovascular characteristics in heart organoids. Our findings show how SynTs organize the barrier and imply their possible roles in supporting embryogenesis, including cardiovascular development. SynT-derived factors and SynT within the placenta may play critical roles in ensuring proper organogenesis of other organs in the embryo.

Evaluation of the cardiotoxicity potential of bisphenol analogues in human induced pluripotent stem cells derived cardiomyocytes.

The importance of evaluating the cardiotoxicity potential of common chemicals as well as new drugs is increasing as a result of the development of animal alternative test methods using human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CM). Bisphenol A (BPA), which is used as a main material in plastics, is known as an endocrine-disrupting chemical, and recently reported to cause cardiotoxicity through inhibition of ion channels in CMs even with acute exposure. Accordingly, the need for the development of alternatives to BPA has been highlighted, and structural analogues including bisphenol AF, C, E, F, and S have been developed. However, cardiotoxicity data for analogues of bisphenol are not well known. In this study, in order to evaluate the cardiotoxicity potential of analogues, including BPA, a survival test of hiPSC-CMs and a dual-cardiotoxicity evaluation based on a multi-electrode array were performed. Acute exposure to all bisphenol analogues did not affect survival rate, but spike amplitude, beat period, and field potential duration were decreased in a dose-dependent manner in most of the bisphenols except bisphenol S. In addition, bisphenols, except for bisphenol S, reduced the contractile force of hiPSC-CMs and resulted in beating arrest at high doses. Taken together, it can be suggested that the developed bisphenol analogues could cause cardiotoxicity even with acute exposure, and it is considered that the application of the MEA-based dual-cardiotoxicity evaluation method can be an effective help in the development of safe alternatives.

Efficacy of Allogeneic and Xenogeneic Exosomes for the Treatment of Canine Atopic Dermatitis: A Pilot Study.

Canine atopic dermatitis (CAD) is a genetically predisposed inflammatory pruritic skin disease. The available treatments for CAD have several adverse effects and vary in efficacy, indicating the need for the development of improved treatments. In this study, we aimed to elucidate the therapeutic effects of allogeneic and xenogeneic exosomes on CAD. Six laboratory beagle dogs with CAD were randomly assigned to three treatment groups: control, canine exosome (cExos), or human exosome (hExos) groups. Dogs in the cExos and hExos groups were intravenously administered 1.5 mL of cExos (5 × 1010) and hExos (7.5 × 1011) solutions, respectively, while those in the control group were administered 1.5 mL of normal saline three times per week for 4 weeks. Skin lesion score and transepidermal water loss decreased in cExos and hExos groups compared with those in the control group. The exosome treatments decreased the serum levels of inflammatory cytokines (interferon-γ, interleukin-2, interleukin-4, interleukin-12, interleukin-13, and interleukin-31) but increased those of anti-inflammatory cytokines (interleukin-10 and transforming growth factor-ß), indicating the immunomodulatory effect of exosomes. Skin microbiome analysis revealed that the exosome treatments alleviated skin bacterial dysbiosis. These results suggest that allogeneic and xenogeneic exosome therapy may alleviate CAD in dogs.

Development of heart organoid cryopreservation method through Fe3 O4 nanoparticles based nanowarming system.

Beyond single cell two-dimensional (2D) culture, research on organoids that can mimic human organs is rapidly developing. However, there are still problems in commercialization and joint research using organoids due to the lack of technology to safely store organoids. Since organoids are 3D complex structures with a certain size (0.1-5 mm) beyond the size of cells, the conventional cell-level cryopreservation method using cryoprotectant (CPA) cannot overcome the damage caused by volume change due to osmotic pressure difference and ice nucleation. Herein, we attempted to solve such limitations by applying a nanowarming system using CPA with high cell permeability and Fe3 O4 nanoparticles. By performing beat rate measurement, histological analysis, contractility analysis, and multi-electrode array, it was verified that the developed method could significantly improve functional recovery and survival of heart organoids after freezing and thawing. In this study, we demonstrated a successful organoid cryopreservation method based on a Fe3 O4 nanowarming system. The developed technology will provide clues to the field of tissue cryopreservation and spur the application of organoids.

Hierarchical 3D Percolation Network of Ag-Au Core-Shell Nanowire-Hydrogel Composite for Efficient Biohybride Electrodes.

Metal nanomaterials are highly valued for their enhanced surface area and electrochemical properties, which are crucial for energy devices and bioelectronics. However, their practical applications are often limited by challenges, such as scalability and dimensional constraints. In this study, we developed a synthesis method for highly porous Ag-Au core-shell nanowire foam (AACNF) using a one-pot process based on a simultaneous nanowelding synthesis method. The unique characteristics of AACNF as metal-based electrodes show the lowest density among metal-based electrodes while demonstrating high electrical conductivity (99.33-753.04 S/m) and mechanical stability. The AACNF's excellent mass transport properties enable multiscale hierarchical incorporation with functional materials including polymeric precursors and living cells. The enhanced mechanical stability at the nanowelded junctions allows AACNF-hydrogel composites to exhibit large stretching (∼700%) and 10,000 times higher electrical conductivity than hydrogel-nanowire composites without the junction. Large particles in the 1-10 µm scale, including fibroblast cells and exoelectrogenic microbes, are also successfully incorporated with AACNF. AACNF-based microbial fuel cells show high power density (∼330.1 W/m3) within the optimal density range. AACNF's distinctive ability to form a hierarchical structure with substances in various scales showcases its potential for advanced energy devices and biohybrid electrodes in the future.

Flubendazole exposure disrupts neural development and function of zebrafish embryos (Danio rerio).

Flubendazole (FBZ) is a benzimidazole anthelmintic drug widely used for treating parasitic infections by disrupting microtubule formation and function through tubulin binding. Recently, its use has extended to include anticancer applications, leading to increased environmental exposure to benzimidazole drugs. However, the impact of FBZ on neural development in aquatic organisms, particularly in aquatic vertebrates, remains poorly understood. This study aimed to investigate the potential developmental toxicity of FBZ during neural development using zebrafish model. Various assessments, including analysis of overall developmental changes, morphological abnormalities, apoptosis, gene expression alterations, axon length measurements, and electrophysiological neural function, were performed. FBZ exposure resulted in concentration-dependent effects on survival rate, hatching rate, heartbeat, and the occurrence of developmental abnormalities. Notably, FBZ-induced changes included reductions in body length, head size, and eye size, as well as the detection of apoptotic cells in the central nervous system. Gene expression analysis revealed upregulation of apoptosis-related genes (p53, casp3, and casp8), downregulation of neural differentiation-related genes (shha, nrd, ngn1, and elavl3), and alterations in neural maturation and axon growth-related genes (gap43, mbp, and syn2a). Additionally, shortened motor neuron axon length and impaired electrophysiological neural function were observed. These findings provide novel insights into the potential risks of FBZ on the neural development of zebrafish embryos, emphasizing the need for risk prevention strategies and therapeutic approaches to address the environmental toxicity of benzimidazole anthelmintics.

Postnatal exposure to trimethyltin chloride induces retinal developmental neurotoxicity in mice via glutamate and its transporter related changes.

Exposure to toxic substances during postnatal period is one of the major factors causing retinal developmental defects. The developmental toxicity of trimethyltin chloride (TMT), a byproduct of an organotin compound widely used in agriculture and industrial fields, has been reported; however, the effect on the mammalian retina during postnatal development and the mechanism have not been elucidated to date. We exposed 0.75 and 1.5 mg/kg of TMT to neonatal ICR mice (1:1 ratio of male and female) up to postnatal day 14 and performed analysis of the retina: histopathology, apoptosis, electrophysiological function, glutamate concentration, gene expression, and fluorescence immunostaining. Exposure to TMT caused delayed eye opening, eye growth defect and thinning of retinal layer. In addition, apoptosis occurred in the retina along with b-wave and spiking activity changes in the micro-electroretinogram. These changes were accompanied by an increase in the concentration of glutamate, upregulation of astrocyte-related genes, and increased expression of glial excitatory amino acid transporter (EAAT) 1 and 2. Conversely, EAAT 3, 4, and 5, mainly located in the neurons, were decreased. Our results are the first to prove postnatal retinal developmental neurotoxicity of TMT at the mammalian model and analyze the molecular, functional as well as morphological aspects to elucidate possible mechanisms: glutamate toxicity with EAAT expression changes. These mechanisms may suggest not only a strategy to treat but also a clue to prevent postnatal retina developmental toxicity of toxic substances.

Verification of Therapeutic Effect through Accelerator Mass Spectrometry-Based Single Cell Level Quantification of hESC-Endothelial Cells Distributed into an Ischemic Model.

As the potential of pluripotent stem cell-derived differentiated cells has been demonstrated in regenerative medicine, differentiated vascular endothelial cells (ECs) are emerging as a therapeutic agent for the cardiovascular system. To verify the therapeutic efficacy of differentiated ECs in an ischemic model, human embryonic stem cells (hESCs) are induced as EC lineage and produce high-purity ECs through fluorescence-activated cell sorting (FACS). When hESC-ECs are transplanted into a hindlimb ischemic model, it is confirmed that blood flow and muscle regeneration are further improved by creating new blood vessels together with autologous ECs than the primary cell as cord blood endothelial progenitor cells (CB-EPCs). In addition, previously reported studies show the detection of transplanted cells engrafted in blood vessels through various tracking methods, but fail to provide accurate quantitative values over time. In this study, it is demonstrated that hESC-ECs are engrafted approximately sevenfold more than CB-EPCs by using an accelerator mass spectrometry (AMS)-based cell tracking technology that can perform quantification at the single cell level. An accurate quantification index is suggested. It has never been reported in in vivo kinetics of hESC-ECs that can act as therapeutic agents.

Generation of human iPSCs derived heart organoids structurally and functionally similar to heart.

Currently, due to the increasing demand for 3D culture, various organoids that mimic organs are being actively studied. Despite active reports, information on heart organoids (HOs), which are the first functional organs, is still insufficient. Parameters for reproducing hearts are: chamber formation, organization with cardiac cells, vascularization, and simulation of electrophysiological signals. In particular, since the heart reflects complex factors, it is necessary to develop HOs that can be simulated in depth. In this study, we have created self-organized HOs using human iPSCs, and validated mimicry of cardiac structures such as chamber and epicardium/myocardium and atrium/ventricle-similar areas. Furthermore, mechanical/electrophysiological features were verified through multiple analyzes after inhibition of ion channels. More importantly, the HOs function, due to the cardiovascular characteristics of HOs, was maintained through vascularization after in vivo transplantation. In conclusion, this study has the advantage of being able to easily and closely recapitulate morphological/functional aspects of the heart.

Immunomodulation of Pluripotent Stem Cell-Derived Mesenchymal Stem Cells in Rotator Cuff Tears Model.

BACKGROUND: Rotator cuff tears (RCTs) induce chronic muscle weakness and shoulder pain. Treatment of RCT using surgery or drugs causes lipid infiltration and fibrosis, which hampers tissue regeneration and complete recovery. The pluripotent stem cell-derived multipotent mesenchymal stem cells (M-MSCs) represent potential candidate next-generation therapies for RCT. METHODS: The difference between M-MSCs and adult-MSCs was compared and analyzed using next-generation sequencing (NGS). In addition, using a rat model of RCT, the muscle recovery ability of M-MSCs and adult-MSCs was evaluated by conducting a histological analysis and monitoring the cytokine expression level. RESULTS: Using NGS, it was confirmed that M-MSC was suitable for transplantation because of its excellent ability to regulate inflammation that promotes tissue repair and reduced apoptosis and rejection during transplantation. In addition, while M-MSCs persisted for up to 8 weeks in vivo, they significantly reduced inflammation and adipogenesis-related cytokine levels in rat muscle. Significant differences were also confirmed in histopathological remission. CONCLUSIONS: M-MSCs remain in the body longer to modulate immune responses in RCTs and have a greater potential to improve muscle recovery by alleviating acute inflammatory responses. This indicates that M-MSCs could be used in potential next-generation RCT therapies.

Establishment of Neurotoxicity Assessment Using Microelectrode Array (MEA) with hiPSC-Derived Neurons and Evaluation of New Psychoactive Substances (NPS).

Background and Objectives: Currently, safety pharmacological tests for the central nervous system depend on animal behavioral analysis. However, due to the subjectivity of behavioral analysis and differences between species, there is a limit to appropriate nervous system toxicity assessment, therefore a new neurotoxicity assessment that can simulate the human central nervous system is required. Methods and Results: In our study, we developed an in vitro neurotoxicity assessment focusing on neuronal function. To minimize the differences between species and fast screening, hiPSC-derived neurons and a microelectrode array (MEA) that could simultaneously measure the action potentials of the neuronal networks were used. After analyzing the molecular and electrophysiological characters of our neuronal network, we conducted a neurotoxicity assessment on neurotransmitters, neurotoxicants, illicit drugs, and new psychoactive substances (NPS). We found that most substances used in our experiments responded more sensitively to our MEA-based neurotoxicity assessment than to the conventional neurotoxicity assessment. Also, this is the first paper that evaluates various illicit drugs and NPS using MEA-based neurotoxicity assessment using hiPSC-derived neurons. Conclusions: Our study expanded the scope of application of neurotoxicity assessment using hiPSC-derived neurons to NPS, and accumulated evaluation data of various toxic substances for hiPSC-derived neurons.

Digital selective transformation and patterning of highly conductive hydrogel bioelectronics by laser-induced phase separation.

The patterning of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hydrogels with excellent electrical property and spatial resolution is a challenge for bioelectronic applications. However, most PEDOT:PSS hydrogels are fabricated by conventional manufacturing processes such as photolithography, inkjet printing, and screen printing with complex fabrication steps or low spatial resolution. Moreover, the additives used for fabricating PEDOT:PSS hydrogels are mostly cytotoxic, thus requiring days of detoxification. Here, we developed a previously unexplored ultrafast and biocompatible digital patterning process for PEDOT:PSS hydrogel via phase separation induced by a laser. We enhanced the electrical properties and aqueous stability of PEDOT:PSS by selective laser scanning, which allowed the transformation of PEDOT:PSS into water-stable hydrogels. PEDOT:PSS hydrogels showed high electrical conductivity of 670 S/cm with 6-µm resolution in water. Furthermore, electrochemical properties were maintained even after 6 months in a physiological environment. We further demonstrated stable neural signal recording and stimulation with hydrogel electrodes fabricated by laser.

Generation of a B2M homozygous knockout human somatic cell nuclear transfer-derived embryonic stem cell line using the CRISPR/Cas9 system.

Beta2-microglobulin (B2M) is a subunit of human leukocyte antigen class-I (HLA-I) heterodimer that mediates immune rejection through activation of cytotoxic T cells. B2M binding to HLA-I proteins is essential for functional HLA-I on the cell surface. Here, we generated a B2M homozygous knockout somatic cell nuclear transfer-induced embryonic stem cell (SCNT-ESC) line using CRISPR/Cas9-mediated gene targeting. B2M KO cell line, which does not express HLA-I molecules on cell surface, has pluripotency and differentiation ability to three germ layers. This cell line provides a useful cell source for investigating immunogenicity of allogeneic ESCs and their derivatives for tissue regeneration.

Next-Generation Intestinal Toxicity Model of Human Embryonic Stem Cell-Derived Enterocyte-Like Cells.

The gastrointestinal tract is the most common exposure route of xenobiotics, and intestinal toxicity can result in systemic toxicity in most cases. It is important to develop intestinal toxicity assays mimicking the human system; thus, stem cells are rapidly being developed as new paradigms of toxicity assessment. In this study, we established human embryonic stem cell (hESC)-derived enterocyte-like cells (ELCs) and compared them to existing in vivo and in vitro models. We found that hESC-ELCs and the in vivo model showed transcriptomically similar expression patterns of a total of 10,020 genes than the commercialized cell lines. Besides, we treated the hESC-ELCs, in vivo rats, Caco-2 cells, and Hutu-80 cells with quarter log units of lethal dose 50 or lethal concentration 50 of eight drugs-chloramphenicol, cycloheximide, cytarabine, diclofenac, fluorouracil, indomethacin, methotrexate, and oxytetracycline-and then subsequently analyzed the biomolecular markers and morphological changes. While the four models showed similar tendencies in general toxicological reaction, hESC-ELCs showed a stronger correlation with the in vivo model than the immortalized cell lines. These results indicate that hESC-ELCs can serve as a next-generation intestinal toxicity model.

Production of Multiple Cell-Laden Microtissue Spheroids with a Biomimetic Hepatic-Lobule-Like Structure.

The construction of an in vitro 3D cellular model to mimic the human liver is highly desired for drug discovery and clinical applications, such as patient-specific treatment and cell-based therapy in regenerative medicine. However, current bioprinting strategies are limited in their ability to generate multiple cell-laden microtissues with biomimetic structures. This study presents a method for producing hepatic-lobule-like microtissue spheroids using a bioprinting system incorporating a precursor cartridge and microfluidic emulsification system. The multiple cell-laden microtissue spheroids can be successfully generated at a speed of approximately 45 spheroids min-1 and with a uniform diameter. Hepatic and endothelial cells are patterned in a microtissue spheroid with the biomimetic structure of a liver lobule. The spheroids allow long-term culture with high cell viability, and the structural integrity is maintained longer than that of non-structured spheroids. Furthermore, structured spheroids show high MRP2, albumin, and CD31 expression levels. In addition, the in vivo study reveals that structured microtissue spheroids are stably engrafted. These results demonstrate that the method provides a valuable 3D structured microtissue spheroid model with lobule-like constructs and liver functions.

BAPTA, a calcium chelator, neuroprotects injured neurons in vitro and promotes motor recovery after spinal cord transection in vivo.

AIM: Despite animal evidence of a role of calcium in the pathogenesis of spinal cord injury, several studies conducted in the past found calcium blockade ineffective. However, those studies involved oral or parenteral administration of Ca++ antagonists. We hypothesized that Ca++ blockade might be effective with local/immediate application (LIA) at the time of neural injury. METHODS: In this study, we assessed the effects of LIA of BAPTA (1,2-bis (o-aminophenoxy) ethane-N, N, N', N'-tetraacetic acid), a cell-permeable highly selective Ca++ chelator, after spinal cord transection (SCT) in mice over 4 weeks. Effects of BAPTA were assessed behaviorally and with immunohistochemistry. Concurrently, BAPTA was submitted for the first time to multimodality assessment in an in vitro model of neural damage as a possible spinal neuroprotectant. RESULTS: We demonstrate that BAPTA alleviates neuronal apoptosis caused by physical damage by inhibition of neuronal apoptosis and reactive oxygen species (ROS) generation. This translates to enhanced preservation of electrophysiological function and superior behavioral recovery. CONCLUSION: This study shows for the first time that local/immediate application of Ca++ chelator BAPTA is strongly neuroprotective after severe spinal cord injury.

Leaf-inspired homeostatic cellulose biosensors.

An incompatibility between skin homeostasis and existing biosensor interfaces inhibits long-term electrophysiological signal measurement. Inspired by the leaf homeostasis system, we developed the first homeostatic cellulose biosensor with functions of protection, sensation, self-regulation, and biosafety. Moreover, we find that a mesoporous cellulose membrane transforms into homeostatic material with properties that include high ion conductivity, excellent flexibility and stability, appropriate adhesion force, and self-healing effects when swollen in a saline solution. The proposed biosensor is found to maintain a stable skin-sensor interface through homeostasis even when challenged by various stresses, such as a dynamic environment, severe detachment, dense hair, sweat, and long-term measurement. Last, we demonstrate the high usability of our homeostatic biosensor for continuous and stable measurement of electrophysiological signals and give a showcase application in the field of brain-computer interfacing where the biosensors and machine learning together help to control real-time applications beyond the laboratory at unprecedented versatility.